Model 5754/5654*

ADSL Compliance
  • Compliant with ADSL standards:
    - Full-rate ANSI T1.413 Issue 2, and ITU G.dmt (G.992.1) standards
    - Splitterless G.lite (G.992.2) specification
    - Annex A
  • Compliant with ADSL 2 standards:
    - G.dmt.bis (ITU G.992.3)
    - ADSL Annex L (reach extended DSL)
  • Compliant with ADSL 2+ standards:
    - G.992.5
    - Annex M
  • DMT modulation and demodulation
  • Full-rate adaptive modem ADSL
    - Maximum downstream rate up to 8 Mbps
    - Maximum upstream rate up to 1024 Kbps ADSL2+
    - Maximum downstream rate up to 24 Mbps
    - Maximum upstream rate of 3 Mbps (Annex M)
  • Supports splitterless ADSL implementation
  • Interoperable with all major DSLAM manufacturers
ATM Protocols
  • WAN mode support: PPP over ATM (RFC 2364) and PPP over Ethernet (RFC 2516)
  • LAN mode support: bridged/routed IP over ATM (RFC 1483)
  • ATM Forum UNI 3.1/4.0 PVC
  • Up to four virtual circuits
  • ATM segmentation and re-assembly
  • ATM AAL5 (adaption layer type 5)
  • OAM F4/F5
Bridge Mode
  • Ethernet to ADSL self learning - Transparent Bridging (IEEE 802.1D)
  • Supports up to 128 MAC learning addresses
Router Mode
  • Static routing
  • DNS Proxy
  • NAPT (Network Address and Port Translation)
  • PPP Half Bridge
  • Virtual Server/DMZ Support/Port triggering
  • Dynamic DNS
  • DHCP (Dynamic Host Configuration Protocol) server, relay and client
  • IGMP Snooping
  • NAT (Network Address Translation)
  • Stateful Packet Inspection (SPI)
  • User authentication for PPP
  • PAP (Password Authentication Protocol)
  • CHAP (Challenge Authentication Protocol)
  • Password protected system management

  • VPN passthrough: PPTP, L2TP, IPsec tunnel
  • IP/Port Filtering
  • Attack Protection
  • Denial of Service Protection
  • Parental control – URL Filtering
  • Password security
  • TR69 Support
  • Auto configuration of ADSL network settings
  • Universal Plug and Play (UPnP)
  • Remote and local command line or HTTP interface configuration
  • Software upgradeable firmware through HTTP interface
  • ATM traffic management functions support UBR without PCR, UBR with PCR, CBR, rt-VBR, nrt-VBR with ATM forum TM 4.1
  • Loads setup from a file for easy configuration input by service providers
Ethernet Interface
  • IEEE 802.3 compliant
  • Four Auto-sensing 10/100 BaseT - RJ45 ports
HTML Graphic User
  • HTTP Graphical User Interface
  • Password protected access
  • Firmware upgrades
  • WAN and LAN side connection statistics
  • Configuration of static routes and routing table
  • Configuration of NAT/NAPT
  • Selection of bridge or router mode
  • PPP user ID and password
  • Configuration of virtual circuits
7 Status Indicators
  • POWER – power on/off
  • DSL – DSL link is established
  • Internet – activity
  • Four Ethernet Indicators – Ethernet link is established
  • 1 year
  • 7.0 x 5.4 x 1.3 inches (178 x 137 x 33 mm)
Regulatory Approval
  • CE, FCC Part 15B, FCC Part 68, RoHS compliant, US/Canadian Safety Approval (BV)
System Requirements
- Your phone line must be enabled for one or more of the standard ADSL services. (Standard services include ADSL 2+ G.992.5, ADSL2 G.992.3, ADSL G.992.1 (G.DMT), G.992.2 (G.lite), ANSI T1.413 issue 2, Annex L Reach Extended ADSL2, Annex M.)

- Directly connected devices, such as computers, switches, and wireless access points, must have an Ethernet port.
Package Contents Back Panel Image
  • ADSL modem/router with Broadcom CPU/DSP chipset
  • Ethernet cable
  • Phone cable
  • CD ROM
  • Quick Start Flyer
  • Energy-saving switching
    power cube, 100 to 240 vac,
    50 to 60 Hz
  • ADSL filter(s)
    An ADSL filter allows a telephone, fax machine, or other telephone instrument to be used even when you are on the Internet with your ADSL modem/router. Filters are included in some markets. Please check the package for specifics, or ask your dealer.
Model 5754 - Back Panel Image

Click for larger view »
See high-res image »

© 2011 Zoom Telephonics, Inc.  All rights reserved.