ADSL Modem/Router

Model 5792


Specifications Download PDF version

ADSL Compliance
  • Compliant with ADSL standards:
       - Full-rate ANSI T1.413 Issue 2, ITU G.dmt (G.992.1)
       - ITU G.992.2 (G.lite) standards
    Compliant with ADSL 2 standards:
       - G.dmt.bis (ITU G.992.3)
    Compliant with ADSL 2+ standards:
       - G.992.5
       - ADSL2 Annex L (Reach extended ADSL)
       - Annex M
  • DMT modulation and demodulation
  • Full-rate adaptive modem
       - Maximum downstream rate of 8 Mbps (ADSL), or 27 Mbps (ADSL 2+)
       - Maximum upstream rate of 1024 Kbps (ADSL), or 1200 Kbps (ADSL 2+) or 2600 Kbps (Annex M)
  • Interoperable with all major DSLAM manufacturers
ATM Protocols
  • WAN mode support: PPP over ATM (RFC 2364), PPP over Ethernet (RFC 2516), classical IP and ARP over ATM (RFC 1577)
  • LAN mode support: Bridged/Routed IP over ATM (RFC 1483)
  • ATM Forum UNI 3.1/4.0 PVC
  • Up to 8 virtual circuits
  • ATM segmentation and re-assembly
  • ATM AAL5 (adaption layer type 5)
  • OAM F4/F5
Bridge Mode
  • Ethernet to ADSL self learning - Transparent Bridging (IEEE 802.1D)
  • Supports up to 128 MAC learning addresses
  • RFC2684/1483 bridged PDU encapsulation
Router Mode
  • IPv6 and IPv4 addressing
  • Static routing
  • DNS Server
  • DHCP (Dynamic Host Configuration Protocol) Server, and Client
  • Quality of Service (QoS) guarantees upstream bandwidth for high priority devices like gaming systems, VoIP adapters, or video
  • NAT (Network Address Translation)
  • Dynamic DNS
  • Second IP address on LAN Interface
  • Interface group supports multiple ports to PVC and bridging groups
  • RIP V1 and V2
  • PPPoE Pass-through
  • Virtual Server/DMZ Support
  • IGMP and IGMP proxy
Wireless 802.11
  • Supports 4 SSIDs
  • Compliant with IEEE 802.11n, 802.11g and 802.11b standards
  • Wireless Distribution System (WDS)
  • Wireless Multimedia Extension (WME)
  • 2.4 GHz - 2.484 GHz frequency range
  • Up to 150* Mbps wireless data rate, 2x2 MIMO (Multiple Input Multiple Output)
  • Outdoor range typically exceeds 1000 feet (304 meters)
  • Indoor range varies depending on walls and other obstructions
  • 64/128 bit Wired Equivalency Protection (WEP)
  • Wi-Fi Protected Access (WPA2, WPA) with Pass Phrase
  • 802.1X Authentication
  • Stateful Packet Inspection (SPI)
  • User authentication for PPP
  • PAP (Password Authentication Protocol)
  • CHAP (Challenge Authentication Protocol)
  • Password protected system management
  • Wireless MAC address filtering
  • Built-in IPsec VPN
  • VPN passthrough: PPTP, L2TP, IPsec tunnel
  • Advanced Firewall Ports Filtering
  • Attack Protection
  • Denial of Service Protection
Ethernet Interface
  • IEEE 802.3 compliant
  • Four 10/100 Mbps auto-sensing RJ-45 ports
  • Two fixed external omni-directional antennas, 5dBi
  • TR-069 compatible
  • Auto configuration
  • SNMP Version 1 and 2
  • Password protected access
  • Universal Plug and Play (UPnP)
  • Remote and local command line or HTTP interface configuration
  • Software upgradeable firmware and device configuration through HTTP interface
  • Loads setup from a file for easy input of a configuration by a service provider
  • ATM traffic management functions support UBR, CBR, rt-VBR, nrt-VBR in accordance with ATM forum TM 4.1
Status Indicators
  • 10 front panel indicators: Ethernet ports (1, 2, 3 and 4 status), DSL active, wireless LAN active, Router available, Power, WPS and Internet
HTML Graphic User
  • Password protected access
  • Firmware upgrades
  • WAN and LAN side connection statistics
  • Configuration of static routes and routing table
  • Selection of bridge or router mode
  • PPP user ID and password
  • Configuration of virtual circuits
  • 1 year
  • 6.75˝ wide x 4.38˝ x 1.38˝ (17.1 x 11.1 x 3.5 cm). Antenna adds 6.13˝ (15.6 cm) to the height.
Regulatory Approval
  • CE, FCC Part 15B and 15C, FCC Part 68, North American Safety approvals, CS-03; RoHS compliant
* 150 Mbps is the maximum speed derived from IEEE standard 802.11 specifications. Actual speeds will vary.

System Requirements

  • Your phone line must be enabled for one or more of the standard ADSL services. (Standard services include ADSL 2+ G.992.5, ADSL2 G.992.3, ADSL G.992.1 (G.DMT), ANSI T1.413 issue 2, Annex L Reach Extended ADSL2, Annex M.)
  • Directly connected devices, such as computers, switches, and HomePlug adapters, must have an Ethernet port. Devices connected wirelessly must have wireless-N, wireless-G, or wireless-B capability.

Package Contents

  • ADSL modem/router with Broadcom CPU/DSP chipset
  • Ethernet cable
  • Phone cable
  • CD ROM
  • Quick Start and Flyer
  • Energy-saving switching power cube, 100 to 240 vac, 50 to 60 Hz
  • Filters and phone adapters:
    Filters and/or phone adapters may be included in some markets. Please check the package for specifics or ask your dealer. An ADSL filter allows a telephone, facsimile machine, or other telephone instrument to be used even when you are online with your ADSL modem.

Back Panel Image

Model 5792 back view
View enlarged, high-res image »

* 150 Mbps is the maximum speed derived from IEEE standard 802.11 specifications. Actual speeds will vary.

© 2014 Zoom Telephonics, Inc.  All rights reserved. Search | Site Map