HomeAbout ZoomTechnical SupportPartnersWhere To BuyProductsContact UsSearch  
ZOOM Products
   

Zoom ADSL X3
Model 5560 - External ADSL Modem/Router/Gateway with Ethernet Interface

Program Files - Setup Files

This modem connects to your computer via the Ethernet interface. No setup files are required.

Firmware

Firmware Upgrade - Version 3.2x

Important Notes:

  • On the modem's System Status page, note the current firmware version. This upgrade is ONLY for modems that have Firmware Version Zoom X3 Ver 2.4.x or later (please do not confuse this with the Showtime Firmware Version). DO NOT attempt to load this upgrade on a modem with a prior Firmware Version (Zoom X3 Ver 2.2.x, 2.1.x, 1.1.x, or 03x). How do I find my firmware version?
  • This upgrade will return the modem to its factory default settings. For this reason, we strongly recommend that you write down or take screen shots of any changes you have made to the modem's configuration pages. You will need to re-enter these settings after you load the firmware upgrade.
  • Macintosh users: You will need to use a Netscape 6.x/7.x or Safari web browser. This upgrade will not work using Internet Explorer. Also note that the upgrade succeeds using Netscape or Safari, but you may not see the "File successfully transferred" and "System is rebooting now" messages.

Select Windows or Macintosh next to your country/location to download (instructions are included):

12/20/04   Size: 1.65 MB

Documentation

Frequently Asked Questions (FAQs)

For troubleshooting and late-breaking information, please visit the SmartFacts Q & A Search Engine. Many users find this is the best way to obtain the answers they need. Click here to go directly to the ADSL X3 modem FAQs.
 

© 2006 Zoom    Home | About Zoom | Technical Support | Partners | Where to Buy | Products | Contact Us | Search
000377  2006-12-20