HomeAbout ZoomTechnical SupportPartnersWhere To BuyProductsContact UsSearch  
ZOOM Products
   

Tribelink

Program Files - PC Files

Tribelink2 -7402 and Tribelink8 -7401 WinBlast (.zip file) The Blaster Program is used to program the firmware on ZoomAccess and TribeLink products. The MSDLC protocol must be installed on Windows for the Blaster program to work. Winblast will work in W95/98/ME.
Tribelink2 -7402 Update v2.50 (.exe file) This is the latest firmware update for the Tribelink2. This can be used with the Blaster program.
Tribelink8 -7401 Update v2.51 (.exe file) This is the latest firmware update for the Tribelink8. This can be used with the Blaster program.

Mac Files

Tribelink2 -7402 and Tribelink8 -7401 MacBlast (.hqx file) This is the utility for programming the firmware of the Zoom Access and TribeLink products in a MAC environment. MacBlast may not work in OS versions later than 7.5.5 due to changes in Open Transport.
Tribelink2 -7402 Upgrade v2.50 (.hqx file) This is the latest firmware update for the TribeLink2. This can be used with the MacBlast utility.
Tribelink8 -7401 Upgrade v2.51 (.hqx file) This is the latest firmware update for the TribeLink8. This can be used with the MacBlast utility.

Documentation

ZoomAccess Owners Manual (.pdf file) Owners Manual for the ZoomAccess as well as the TribeLink manual is no longer available. The TribeLink units are similar to the ZoomAccess product, however, there are 2 differences.

  1. The TribeLink2 does not support IP Filtering.
  2. The TribeLink2 does not support any Wanderlink software i.e. Dial out redirector.
 

<Back
Program files
Documentation
Register your Zoom Product
Ask Zoom Tech Support for Personal Assistance
SmartFacts™ Q&A Search Engine

top

©2008 Zoom    Home | About Zoom | Technical Support | Partners | Where to Buy | Products | Contact Us | Search
  2006-04-20